Vacuum Tubing
Accuflow Systems Saint-Gobain Silicone Tubing, 1/2 in ID, 0.847 in OD
Tygon SPT-3370 IB is a platinum-cured, braid-reinforced silicone tubing engineered for pressure-resistant sanitary fluid transfer in food, beverage, and bioprocessing applications. It tolerates repeated SIP and CIP cleaning cycles and provides a smooth inner bore for hygienic transfer.
- Material: Silicone.
- Reinforcement: Braid reinforced.
- Inner diameter (ID): 1/2 in (12.7 mm).
- Outer diameter (OD): 0.847 in (21.51 mm).
- Wall thickness: 0.1735 in (4.41 mm) (calculated from ID and OD).
- Maximum recommended operating temperature: 320°F (160°C).
- Working pressure: 125 psi at 73°F, 90 psi at 320°F.
- Minimum bend radius: 1-1/4 in.
- Package length: 50 ft.
- Compliance: 3-A Sanitary Standard No. 18-01; FDA 21 CFR 175.300; NSF 51 certification.
Accuflow Systems Saint-Gobain Tubing, Norprene TPE, 3/8 in ID, 50 ft
Tygon Norprene A-60-G tubing is a thermoplastic elastomer (TPE) industrial-grade tubing engineered for chemical dispensing and peristaltic pump applications. It offers high flexural fatigue resistance, abrasion and weathering resistance, and a wide operating temperature range for reliable fluid transfer in laboratory and industrial systems.
- 3/8 in ID x 5/8 in OD, 1/8 in wall, 50 ft length.
- Thermoplastic elastomer formulation optimized for chemical dispensing and fluid transfer.
- Temperature range -75°F to 275°F (-60°C to 135°C).
- Maximum working pressure 13 psi at 73°F; 8 psi at 180°F.
- Designed for long life in peristaltic pumps; high flexural fatigue resistance.
- Abrasion, ozone, and UV resistant; low gas permeability.
- Tensile strength 1,000 psi; ultimate elongation 375%.
Accuflow Systems Saint-Gobain FEP Tubing, 1/8 in x 1/4 in, 50 ft
Pharma-grade FEP tubing engineered for high-purity fluid transfer in laboratory, bioprocess, and analytical applications. The tubing offers low adsorption, wide chemical compatibility, and compatibility with common sterilization methods for single-use or reusable assemblies.
- Material: FEP fluoropolymer.
- Inner diameter: 1/8 in (0.125 in, 3.2 mm).
- Outer diameter: 1/4 in (0.250 in, 6.4 mm).
- Wall thickness: 0.062 in (inferred from OD and ID).
- Coil length: 50 ft.
- Temperature range: -73°C to 203°C (-100°F to 400°F).
- Chemical resistance: Excellent resistance to acids, bases, and solvents.
- Sterilization: Autoclavable (30 min at 121°C) and ethylene oxide compatible.
- Color and properties: Translucent, low water absorption, Shore D hardness ~55.
Accuflow Systems Saint-Gobain Tygon ND 100-80 Tubing, 0.03 in ID, 500 ft
Tygon ND 100-80 is a thermoplastic microbore tubing formulated for medical and analytical fluid transfer where small diameters and thin walls are required. It meets USP <88> Class VI biological test criteria for fluid path applications and is designed to provide higher pressure resistance at microbore dimensions.
- Microbore inner diameter 0.03 in, outer diameter 0.09 in, wall thickness 0.03 in.
- Supplied in 500 ft coils for extended runs and instrument use.
- Thermoplastic formulation offering higher durometer for improved pressure resistance.
- Suitable for drug delivery, cannulas, external drainage, and diagnostic equipment.
- Meets biological test requirements for fluid path applications (USP <88> Class VI).
Accuflow Systems PCS Pump Tubing
Purity One™ OneSil Pump biopharmaceutical grade silicone tubing has been formulated for demanding pumping applications in biopharmaceutical processing. This low-hysteresis pump grade silicone tubing is moldable for single-use assemblies, has higher pressure ratings and better kink resistance than traditional 50D silicone tubing, and has a large temperature range, making it an excelling choice for pumping, sampling, filtration, sterile filling and transfer, and buffer and media prep. Full validation guide and USP <665> Extractables testing available.
Accuflow Systems Saint-Gobain Peristaltic Pump Tubing, 5/8 In ID, 7/8 In OD
Saint-Gobain PharmaPure peristaltic pump tubing is a low-spallation thermoplastic tubing engineered for bioprocessing and peristaltic pump applications. This 25 ft coil in the 5/8 in ID x 7/8 in OD configuration provides consistent flow, extended pump life, and low particle generation for high-purity fluid transfer.
- Low particle shedding for high-purity applications.
- Thermoplastic construction designed for peristaltic pump compatibility.
- 5/8 in ID, 7/8 in OD, 1/8 in wall, 25 ft coil.
- Maximum working pressure 12 psi at 73 °F.
- Vacuum rating 25 inHg at 73 °F.
- Minimum bend radius 2-3/4 in.
Accuflow Systems Single braid Reinforced Tubing
Purity One™ OneSil single-braid reinforced biopharmaceutical grade silicone tubing has been formulated for demanding high-pressure applications in biopharmaceutical processing. This flexible silicone tubing is moldable for single-use assemblies and has higher pressure ratings than non-reinforced tubing, making it an excelling choice for bulk transfer, SIP/CIP, filtration, and buffer and media prep. Full validation guide and USP <665> Extractables testing available.
Accuflow Systems Saint-Gobain Versilic Stopper, Silicone, 5 x 9 x 20 mm
Versilic silicone stoppers, 5 x 9 x 20 mm, provide a tight laboratory seal for tubes, flasks, and vessels. Molded from silicone, they offer broad chemical compatibility and a wide operating temperature range suitable for routine biological and biopharmaceutical workflows.
- Silicone material
- Dimensions: 5 x 9 x 20 mm (0.197 x 0.355 x 0.788 in)
- Pack quantity: 10 per pack
- Withstands temperatures from -70 °C to 250 °C (-94 °F to 482 °F)
- Suitable for biology, hematology, microbiology, and biopharmaceutical applications
- Meets FDA and BGA standards
Accuflow Systems Saint-Gobain Tygon Tubing, 3/4 in ID, 50 ft
Clear, flexible PVC tubing designed for laboratory and process fluid transfer. The tubing uses a phthalate-free PVC formulation for general laboratory, food, and beverage handling where a clear, flexible, and chemically resistant hose is required.
- Inner diameter: 3/4 in (19 mm).
- Outer diameter: 1 in (25.4 mm).
- Wall thickness: 1/8 in (3.2 mm).
- Package length: 50 ft (15 m).
- Material: special PVC, phthalate-free (non-DEHP).
- Typical applications: laboratory fluid transfer, process lines, food and beverage handling.
Accuflow Systems Saint-Gobain Tygon Tubing, 1/32 in by 3/32 in, 50 ft
Crystal-clear, phthalate-free laboratory tubing designed for instrumentation connections, venting, drain lines, and vacuum applications. The tubing resists flex-fatigue and abrasion, features a glassy-smooth inner bore to minimize buildup, and is marked at 1-foot intervals for easy measurement. Suitable for autoclave and ethylene oxide sterilization, supplied in 50 ft lengths with 1/32 in I.D. and 3/32 in O.D.
- Crystal-clear, phthalate-free construction.
- Resists flex-fatigue and abrasion.
- Marked at 1-foot intervals for measurement.
- Glassy-smooth inner bore reduces buildup.
- Sterilizable by autoclave and ethylene oxide.
- Dimensions: 1/32 in I.D., 3/32 in O.D., 50 ft length.
Accuflow Systems Saint-Gobain Tubing, Tygon E-3603, 3/16 in ID, 50 ft
Tygon E-3603 tubing is a clear, flexible laboratory PVC tubing designed for chemical resistance, low contamination, and extended service life in instrumentation and general laboratory fluid handling. It features a glassy-smooth inner bore to reduce buildup and is free of BPA and phthalates.
- 3/16 in (4.8 mm) inner diameter, 3/8 in (9.5 mm) outer diameter, 3/32 in (2.4 mm) wall, 50 ft (15.2 m) length.
- PVC construction provides chemical resistance and flexibility.
- Contains no BPA or phthalates; non-oxidizing and non-contaminating.
- Maximum working pressure 36 psi (2.5 bar) at 73°F (23°C); vacuum rating 29.9 inHg.
- Glassy-smooth inner bore reduces buildup and facilitates cleaning.
- Suitable for laboratory instrumentation, peristaltic and vacuum pumps, condensers, and gas or drain lines.
Accuflow Systems Saint-Gobain Tygon Laboratory Tubing, Non-DEHP, 1/16 in ID
Tygon E-3603 laboratory tubing is a clear, flexible, non-DEHP PVC tubing formulated for laboratory fluid transfer, peristaltic pump use, and vacuum applications. It features extra-heavy walls for vacuum resistance, a smooth polished inner wall to minimize buildup, and high flex-fatigue and abrasion resistance for extended service life.
- 1/16 in inner diameter, 1/8 in outer diameter, 1/32 in wall thickness.
- 500 ft (152.4 m) length per roll.
- Clear, non-DEHP PVC, phthalate-free.
- Withstands full vacuum at 73°F (29.9 inHg / 760 mmHg).
- Maximum recommended operating temperature 165°F (74°C).
- Resistant to flex-fatigue and abrasion for pump and instrument lines.